Our Products | Valves
Model 25P  
  Model 25P
Mascon make 2/2 way Pneumatic Actuated Diphragm Valves are Basically manual diaphragm valves modified to operated by piston type pneumatic actuators essential for automation of equipment .These valves can be operated from Remote location.
 Selling Points:
1) Zero Cavity design specially Designed for pharma, water treatment and Food processing industries.
2) These valves can be operated by computer and PLC from remote location that helps reducing labor force involved for operating the system.
  Specifications:
Size
:
15 NB to 50 NBand 13mm OD to 50mm OD
End Connection
:
Buttweld, Triclover end, Screwed and Flange End.
Body
:
ANSI304 , ANSI 316,ANSI316L
Bonner
:
Aluminum (Export coated),ANSI304
Actuator
:
ANSI304
Diaphragm
:
EPDM ,Silicon ,EPDM Backed PTFE
System Parameters:
a) Fluid : Air , Water, Steam
b) pressure : Vacuum to 6 bar.
c) Temperature : 0 to 130 deg C.
Sanitory Back Pressure Regulator
Sanitory Back Pressure Regulator
 SERIES - BPRV
This valve is designed to control and regulated upstream pressure that is inlet pressure of the valve. The basic working principal of the valve is spring and diaphragm type .This design is especially to meet the stringent sanitary and pharma cleanliness norms. There are no cavities in the valve body as well as in the diaphragm chamber as this is made out of pharma tube and the actuator, spring chamber is made out of stainless steel sheet metal .this valve is 100 % drainable there will be no dead leg in the valve at the Outlet. Being diaphragm type construction this is more technically advance and suitable for CIP application compare to other compact valves because those valves are designed on the principal of spring and piston which is not suitable for zero dead leg as there are always be deposition in the aria of 'O' ring and again the piston requires greasing also which is not Acceptable to FDA
 Specifications: 
Size
:
15 mm OD to 50mm OD
End Connection
:
Buttweld end, Tri clover end,
Seating and Sealing
:
Silicon , EPDM
Body Wetted PArt
:
ANSI SS 316L
Inlet Pressure
:
0 - 6 Bar
Set Pressure
:
0.5 - 3 Bar
Temperature
:
-5° C TO 130°C MAX
Internal Finish
:
UP to Ra . < 0.4 micron . (220 grits)
Model 2100/2200
  Model 2100/2200
 Mascon make Pneumatic cylinder actuator operated 'Y' Type 2/2 way Globe Valve & same construction is also available with 'T' Type 3/2  way globe valve
 Selling Points:
 1) Completed valve is made in ANSI304 Invest cast including Actuator and Bonnet.
 2) Compact design preferred by OEM when there is lack of space in the equipment.
 3) Flow capacity is marginally less than ball valve but largest than conventional globe valve.
 Specifications: 
Size
:
15 NB to 80 NB
End Connection
:
Screwed and Flange End.
Body & Bonnet
:
ANSI304 / ANSI 316
Gland
:
Silicon combination (self compration type)
Seating
:
PTFE
 System Parameters:
 Fluid: Air, Water, Steam and Chemical
 Temperature:- 15 to 180 deg. C.(Temperature above 180 deg. C.  refer  Mascon)
 pressure: Vacuum to 10 bar.
Model 2JM/P
  Model 2JM/P
 This variant of diaphragm valve is know as Zero Dead Leg Contraction .This  construction is designed to drain out evaen small amount of fluid  while flowing  through the valve, when valve seat is closed by  diaphragm the valves changes  into recycling mode from third pipe  port thus the flied keeps running in the  pipe Line.
 Selling Points:
 1) Zero Dead leg inside the valve that means no deposition of fluid.
 2) These valves can be mode in manual wheel operated as well as  pneumaticoctuated.
 Specifications: 
 Size
:
15 NB to 50 NB and 20mm OD to 50mm OD
 End Connection
:
Buttweld, Triclover end
 Body
:
ANSI 304 , ANSI 316,ANSI 316L
 Bonner
:
Manual : Cast Iron ,ANSI 304
Pneumatic : Cast Aluminum , ANSI 304
 Diaphragm
:
EPDM ,Silicon ,EPDM Backed PTFE
 System Parameters:
 a) Fluid : Water,Pharmaceutical Liquieds
 b) pressure : 0 to 6 bar.
 c) TEmperature : 0 ti 130 deg C.
  Next
Our Products Range
>> Pneumatic Products
>> Flot Switch & Pressure Switch
>> Pressure & Temperature Gauge
>> Rota Meter & Meno Meter
>> Valves
>> Brass Fitting
>> P.U. Pipes